 A.
The hinges are Blum--they are adjustable in 3 directions.
Start with patience and a Phillips Screwdriver and you'll
be hanging fine in no time! |
HEIGHT ADJUSTMENT
This adjustment involves two screws, one to the top
and one to the bottom of the clip. Loosen the
screws slightly and then lift or lower the door
until it is in the position you want. Re-tighten the
screws to secure the door.
|
|
Height adjustment |
 |
|
Use these two screws to adjust the height of the
doors and/or align the tops of the doors.
|
|
DEPTH ADJUSTMENT
Use this screw to adjust how far out or in the doors
are in comparison to your cabinet and to the other
cabinet doors and drawers surrounding it.
Loosen the screw and manually push or pull the door
to adjust it. Re-tighten the screw when the
door is in the position you want.
|
|
Depth adjustment |
|
|
Use this screw to bring to door into alignment
with neighboring cabinet doors/drawers.
|
|
SIDE TO SIDE ADJUSTMENT
Using a phillips head screwdriver, turn the
adjustment screw clockwise and counterclockwise to
move the door--the direction of turn and it's effect
is dependent on which the side of the door the hinge
is attached.
On a door with a RIGHT SIDE HINGE:
Turn the screw CLOCKWISE to move the door to the
RIGHT
Turn the screw COUNTERCLOCKWISE to move the door
to the LEFT
On a door with a LEFT SIDE HINGE:
Turn the screw CLOCKWISE to move the door to the
LEFT
Turn the screw COUNTERCLOCKWISE to move the door
to the RIGHT
|
|
Side to side adjustment |
|
|
Use this screw to adjust the gap between doors,
walls and other cabinets for parallel alignment. |
|
