[Turnip]

I'm going over my draft order and about to fax it in but want to double check something about the hinges:


1. For a 88" tall pantry, I'm getting 153" hinges for internal pull out drawers. It seems lke you order them singly (i.e. not in a 2 pack). For a 64" door, are 2 hinges enough?

2. For my regular doors, my draft order has INTEGRAL N HINGE 130 2PK (042-613-00). But the Ikea website lists the 130 hinges as a 3 pak, and lists the 125 hinges as a 2pk. I'm confused as to which I should be ordering? 125 or 130? (i want soft close--see below)

3. I want the soft close doors. I have a total of 11 doors. My draft order has 12 INTEGRAL DR DMPR F HINGE 2PK (801-262-13). Does you use 2 dampers per door or 1 per door? Because i have 12 2 paks (i.e. 24 dampers)?

Thanks for our help!

[forhojat]

Hello.

1. You will need 3 of the 153 hinges for your 64" door. The drawers will not clear with any other hinge.

2. If you are planning on using the hinge dampers, you will need to purchase the 125 hinge. The 125 hinge is replacing the 130 hinge. The door dampers will NOT snap onto the 130 hinge.

3. The hinge dampers come in a 2 pack, you will need 1-2pk per door.

Hope that helps

[Turnip]

Originally Posted by forhojat

Hello.

1. You will need 3 of the 153 hinges for your 64" door. The drawers will not clear with any other hinge.

2. If you are planning on using the hinge dampers, you will need to purchase the 125 hinge. The 125 hinge is replacing the 130 hinge. The door dampers will NOT snap onto the 130 hinge.

3. The hinge dampers come in a 2 pack, you will need 1-2pk per door.

Hope that helps

Wow I"m glad I asked because the Ikean put all 130 degree hinges in my draft order!! And then at the end I was like "I want bumbers' so she added them but didn't change the hinges.

Although it's even more confusing becuase it says 130pk 2 pk..... do you know the item # for the the hinges I really need?

[madp67]

Originally Posted by Turnip

I'm going over my draft order and about to fax it in but want to double check something about the hinges:


1. For a 88" tall pantry, I'm getting 153" hinges for internal pull out drawers. It seems lke you order them singly (i.e. not in a 2 pack). For a 64" door, are 2 hinges enough?
You would need 3 153 hinges for that door. They come single.

2. For my regular doors, my draft order has INTEGRAL N HINGE 130 2PK (042-613-00). But the Ikea website lists the 130 hinges as a 3 pak, and lists the 125 hinges as a 2pk. I'm confused as to which I should be ordering? 125 or 130? (i want soft close--see below)
You should order the 125's that accept the dampers.

3. I want the soft close doors. I have a total of 11 doors. My draft order has 12 INTEGRAL DR DMPR F HINGE 2PK (801-262-13). Does you use 2 dampers per door or 1 per door? Because i have 12 2 paks (i.e. 24 dampers)?
In my kitchen I currently have installed one damper per door, with the exception of the 64" door which has 2 dampers and the doors work beautifully. Most other folks here also do one damper per door. Six packs should be fine.

Thanks for our help!

[madp67]

2PK 125 Hinges = 701-323-75
2PK Integral DR DMPR F Hinge = 801-262-13

[Turnip]

Y'all rock!!! Thank you!

[DulcineaK]

i only use one hinge damper per door and it works perfectly.
fwiw i like dampers on both drawer glides

[Turnip]

Oyy! I forgot the deco strip to hide my undercab lighting?

What is the name or item # for Nexus YB deco strip to hide lighting on bottom of wall cabs? the order sheet just lists "beveled", "Contoured Deco" and "rounded"?

I think I want Contoured Deco right??

[madp67]

I used rounded for the undercabinets and contoured Deco for the top of the cabinets.

[forhojat]

If you are using the Nexus Yellow Brown, you only have the choice of a rounded deco strip.