There's some brackets that come with the deco strip that are sort of "Z" shaped. The bottom part of the Z is short and the top part is the longest, if that makes any sense. Normally the shorter end goes in a slot cut into the back of the strip and the longer end is screwed into the underside of the cabinet. Now turn the bracket upside-down and it will work for the crown moulding. The short end goes over the top back edge of the deco strip and the long end gets screwed into the cabinet from the top. There's also a hole in the middle section that you would screw into the strip when using it this way. So you would need to do this before putting up the cabinets. I decided to do this only on my pantry and fridge cabinets after they were installed, so I had to drive screws from underneath.
I'll try to take some pics if any of this is not clear. Hope that helps!
Oh, one more thing - welcome to Ikeafans!
|
