[iamiwz82]

I ordered two 15" pullouts plus one 80" pantry with pullout.

Anyways, the part breakdown from the store was as follows:

Drawerfront - 1
Frame - 1
legs - 1
Rationell N DP FUL EXT DRAW 15" SLVNA - 401-070-80 - 1
Rationell N FUL EXT DRW 15" SLV NA - 301-070-66 - 2
Rationell Deep DRWFRONT 15" 301-089-23 - 2

Now my issue is that I have two deep fronts and no shallow fronts, so I am confused as to what the heck I am supposed to be doing. This is the same with the other pullout, plus the pantry has 3 deep, 2 shallow, but only 4 deep fronts.

The instructions seem to think I have a shallow front, but I dont have one, and it also shows a deep drawer for the lower and the middle, when I only have one deep.

:?:X

	Rationell definition Rationell is a line of kitchen products that enhance the basic AKURUM/FAKTUM lines, including the Blum-made drawer boxes.

[GardenOfDarwin]

This is a "Known Trouble Spot". It's been addressed by kmcg in her Lessons Learned on the Fansite side -- click on home in the upper right corner of your screen, then go to Lessons Learned and look for kmcg's post.

I've not faced one of these beasties myself, but Kathy's done a great job of explaining it. I hope that helps!

Susan

[iamiwz82]

GardenOfDarwin wrote:

This is a "Known Trouble Spot". It's been addressed by kmcg in her Lessons Learned on the Fansite side -- click on home in the upper right corner of your screen, then go to Lessons Learned and look for kmcg's post.

I've not faced one of these beasties myself, but Kathy's done a great job of explaining it. I hope that helps!

Susan

I've looked but the part numbers are completely different, they actually match exactly what is online, unlike the new part numbers, as far as I can tell.