[Arturo]

Can somebody check out their assembled pantry and give me an approx. positioning of each of your drawers? (counted holes from the top) I believe the correct way of assembling this pantry is Deep drawer on top, shallow, shallow, deep and deep w/ both top and bottom deeps assembled to the door. I have no clue where I should position the top drawer or the rest of them. When you assembled yours did you do top and bottom then configure the rest as needed? I just need to have a ballpark idea of where to put our drawers. Thanks for any help.

	W definition W is a wall cabinet designation, as in W18, can be a stand-in for Wide, or when followed by a / stands for With.

[mzgloves20]

Arturo wrote:


I believe the correct way of assembling this pantry is Deep drawer on top, shallow, shallow, deep and deep w/ both top and bottom deeps assembled to the door.



The part above that you stated is correct... I'm not home to count the rail placement. Pretty much personal pref for the middle pull outs. The placement should be shown with the pull out drawer assembly instructions. Have to count the holes in the picture starting from the top down. The top shelf is lined up with the bottom of the top door.

	W definition W is a wall cabinet designation, as in W18, can be a stand-in for Wide, or when followed by a / stands for With.

[kmcg]

what gloves said is right. Here's another twist I ran into - they sold me some extra parts for deep drawers that totally confused me. My saga is recounted under Lessons Learned on the main site, if you happen to run into that situation.

kathy

[mzgloves20]

Ahhh..

yes the pull out tray fronts with the adjusting rod attachment... I still have those lying on the floor....wonder what I can use those on...????