|
Re: Akurum/Faktum - Integral Door Hinge Installation
No screws - just put the hinge in the hole, and snap down the "lid". As you do this, the grey plastic flange expands in the hole, grabbing the sides and holding the hinge in place.
Just make sure the hinge is properly seated (flat to the door) in the hole before you do the snap. If you make a mistake, a well placed flat screwdriver blade (there's a little notch on the inside edge of the flap) will lift the flap and enable you to set it properly.
__________________
A-P-A-R-T/Together, Inc.
Find out how you can get a piece of Chuck. 
Just taking my inner IKEA geek out for a walk.
|
Re: Akurum/Faktum - Integral Door Hinge Installation
It does work! saw those screw holes and let logic get it the way. Thanks- that was easy
