Discuss Glass tile thinset recommendations on IKEAFANS.com. We're Personalizing the IKEA Experience. Glass tile thinset recommendations - Choosing a backsplash is like taking a ride in a Dr. Seuss-like Backsplooziesplat! All who enter here are sure to leave with more ideas than thought possible..
I just received my glass mosaic tiles. I got the grout, but am overwhelmed by choices on thinset. Do you know if I could use any kind of thinset brand that they sell at Home Depot or Lowes?
Unfortunately, the manufacture is not being overly helpful since they just keep telling me to use white regular modified thinset for installation.
I have Mapei UltraFlex 2 left over from a floor install, but it says nothing about glass tile on the back. I'm guessing it is not safe to use.
Whatever I use I want to make sure to get this right
Thanks in advance.
Joe
Last edited by Emmie9999; Mar 24th, 08 at 1:29 pm.
I saw you had not received any answers to this post, so I have moved it to "The Fabulous Backsplooziesplash", in the hopes it might get a bit more attention. others have done glass mosaic tile backsplashes, and someone should be able to help you out.
Hi Joe -
I used Custom Building Products "MegaLite" on my glass wall tiles in the bathroom. You *might* be able to find it at HD/Lowes; more likely a tile store.
Glass tiles *must* have white thinset - especially if they're even remotely translucent. It needs to be "sticky" so they don't slide down/fall off before they set. Additionally, there are differences betw. mortars for ceramic tiles v/s glass tiles in that ceramic tiles can absorb some of the water from the mortar, whereas glass tiles are completely water-resistant, so won't. Meaning, your mortar needs to be stickier and "drier" in comparison, because none of the water will be absorbed into the glass tiles.
Also recommended for wall-install glass tiles are: TEC "Superflex" mortar (white) Mapei "GraniRapid" mortar (white).
I think Lowe's carries "Mapei" brands, and HD "Custom Building Prod"
Tiling's not hard. Prep is time-consuming, but the job itself isn't that bad.
It's kinda fun, too.
Last edited by RubrikGreen; Apr 3rd, 08 at 5:39 pm.
Reason: font weirdness corrected
Also when applying the thinset to either the wall or "back-buttering" the tile, on glass tiles with any translucence at all, you must use the straight side of the trowel. Don't use the notched side or you will get a striped look that shows through the tile. Thanks!
We were told to use latex modified thinset, which seems to mean adding milk looking stuff to dry stuff. All we could find was whatever HD sold, which was adequate (afterall, we have tile) but I strongly suspect there's something better out there. Glass tiles like to slide down the wall It seemed to help to tape the sheet to the wall after the initial sticking up...
So NBeth -
how did your tiling look when finished? You're happy, right?
The having to use tape to keep the tiles up might be just slightly-too-thin mortar. If you got it to work, then you're good. We luvs us that blue tape.
When I used the "MegaLite" for my tiles, I didn't have any of that problem (and I'm glad!). It was thickish stuff. And yes, latex is the milky additive - makes the thinset more flexible, for one. Less likely to crack.
I still go into the bathroom every day, look at the tile and think "Yes! I LIKE it!"
If you look at your tile and say "Yes! I Like It" - that's the thing.
We had sliding problems with thick thinset too--or so it seemed. We had a super hard time getting the right amount on the walls, but then I'm pretty sure that glass on walls in corners you can't quite reach is NOT the recommended first tiling project! Sometimes it was oozing out everywhere--we did a lot of picking it out between the tile and unfortunately chipped some of them .
But yes, the tile itself is SO naturally gorgeous that we do love it.
And, those tulips look like the perfect solution to that corner you couldn't reach so may have chipped a tile or two
One thing we've found helpful for when thinset oozes out between tiles are Q-tips. Obviously, you have to catch it when it's wet, but I found them easier to use than spacers to clean out the spaces.
We had a few issues of the tiles slipping while wet as well. Additionally, some of them came out a bit crooked and the grout lines were not absolutely perfect, but overall it looks nice. You can see them in my gallery.
And, those tulips look like the perfect solution to that corner you couldn't reach so may have chipped a tile or two
One thing we've found helpful for when thinset oozes out between tiles are Q-tips. Obviously, you have to catch it when it's wet, but I found them easier to use than spacers to clean out the spaces.
Kristen
That was a beauty shot. Normally it's more like bottles of oil and colanders and STUFF. But yes, it's usually blocked. Unfortunately there are chips in lots of other places. A good thing the tile is solid color so they're only noticeable to us!
We used dental picks from a geeky odd tools store to clean between--probably one reason we chipped so many
IKEAFANS is a trusted authority on the design of IKEA kitchens. From articles to get you started to tools and links designed to ease the way and special offers just for IKEAFANS, we've thought of everything to make designing your own IKEA kitchen a snap. Check out our Kitchen Planning Guide...
Confirm
Join In!
It seemed to help to tape the sheet to the wall after the initial sticking up...
Sometimes it was oozing out everywhere--we did a lot of picking it out between the tile and unfortunately chipped some of them 
. 
