[BeachsidePaul]

Well thanks to Susan's reference article on the various configurations of the 88" pantry I have come up with yet another couple of questions.

Our plan is to use two 30" x 88" pantries side by side. I'd like to take one level of the 6.25" drawers that I'll be having in one of the cabinets and make it 2 15" wide drawers, the question here is, does IKEA offer a "divider" piece of some sort that will be placed between the drawers? Question number two, and this one is really stupid probably but need to check, the IKEA website does not show any 30" deep drawers, nor does it show any 30" wide drawer fronts for shallow or deep drawers. I'm sure all these are available but I'd like to verify before I get too deep in this design. If you happen to know part numbers great, but mainly I just want to know they exist Thanks to all for their assistance. Paul

[DulcineaK]

there is a drawer partition which could be attached to a stably installed shelf (reinforced) in order to create the side by side 15" drawers. but it will only work for the shallow drawers (unless you're installing it at the bottom, that should work too)

the deep drawer fronts come in what is standardly referred to as a "drawer front pack"in which you get the (for example) 2 deep drawer fronts and 2 shallow 15" fronts (if you were ordering for a 30" wide cab). There is also a shallow 30" wide drawer which is often called the "oven drawer"

hth
if you have any questions let us know

[BeachsidePaul]

Dulcie, Thanks and once again I'm in thinking mode to try and figure out what to do. :-( Paul

[DulcineaK]

so much is possible with the component system of Akurum, then you add modifications and the sky is the limit... both my blessing and curse