[oslofan]

Hi - I designed a kitchen using one of the ikea corner cuboards. But I went to the ikea store today and wasn't happy with the way the lazy susan works. I don't have sufficient space for the 49" cuboard that I did like - the one where the shelf extends. So I thought I would just put two base cabinets almost touching in the corner and just fill in the corner with the countertop. If I do this, how can I trick the program to cover this hole over? Or are there other solutions I should consider? Thanks@

[wd40]

The bottom line is that corners are always a compromise and I'd rather have a 37" corner cabinet if it meant not having to waste all that space with nothing in the corner.

But, from what I can see in the pdf, you seem to have plenty of space for a 49" corner cabinet next to the stove (instead of the two narrower cabinets).

[plainjane]

There is an option to add just a countertop (option below the wall cabinets): be aware that if you rotate this object it tends to dissappear... if you need to, rotate once, reposition and then rotate again. I think that the minimum size is a counterwidth but you can play with the other dimension.